Electrical Hazardous Areas Installation Inspection&Maintenance IEC 60079-17 Training

DEVELOP Training Center menyelenggarakan Kelas Electrical Hazardous Areas Installation InspectionMaintenance IEC 60079-17 Training yang akan mengajarkan kepada Anda tentang :

• Inspeksi KelistrikanInstrumentasi/ElectricalInstrument Inspection Hazardous Area sesuai dengan Standar Internasional
• Aplikasi teknik-teknik terkait Electrical/Instrument Inspection untuk Hazardous Area
• Inspeksi efektif untuk sistem Kelistrikan/Instrumentasi dengan Studi Kasus real plant operation dari praktisi
• Penilaian/Assessment sistem instalasi peralatan untuk daerah bahaya
• Metode analisa dan klasifikasi atmosfer gas eksplosif
• Pemilihan dan instalasi peralatan secara benar agar aman digunakan

Pembahasan materi mengetengahkan contoh-contoh latihan dalam konteks dunia proyek sehingga lebih familier dengan aktivitas proyek sehari-hari.

Electrical Hazardous Areas Installation Inspection&Maintenance IEC 60079-17 Training

DEVELOP menerapkan Syllabus Electrical Hazardous Areas Installation InspectionMaintenance IEC 60079-17 Training dengan tahap-tahap pembelajaran berkualitas sbb :

Sesi 1-2

Skill Focus:

• Electrical Hazardous Areas Installation InspectionMaintenance IEC 60079-17 Overview
• Applicable Related StandardsCodes (NFPA,IEC,ISA,EN)
• Hazardous Locations Hazardous Explosive Materials
  • Oil Gas, Power Plant, Petrochemical, Process Plant, Mining/DustManufacturing Industries
  • Area Classification
  • Explosive Gas Atmospheres
  • Group GasClass temperature
• Flammable VaporsExplosive/Ignitable Mixture
• Flammable Material Present Continuously, IntermittentlyPresent Abnormally
  • Zone 0,Zone 1Zone 2
  • Zone 20,Zone 21Zone22
  • IEC Classification per IEC-60079-17
  • Ansi/Nfpa 70 National Electric Code
• Flash Point, Flammable Liquid Nfpa 30 Test Procedures
  • Combustible Liquid
  • Class I Areas/LocationsClass I Temperature
  • Class I Division 1 Division 2
  • Abnormal Operation (Failure of Processing EquipmentFailure of ventilation)
  • Explosive Range of Class I Flammables
• Flammable vapors in Equipments Usage
  • Pump Seals
  • Valve Packing
  • Overpressure Protection Devices (Relief Valves, Rupture Discs, Conservation Vents)
  • Compressor Seals
• Process DrainsVents
• Adequate Ventilation Safe Gap (Mesg)
• Minimum Igniting Current (Mic) Ratio
• Authority Jurisdiction
• Unclassified areas
• Determination Of Area Classification
• Assessment Method (Process Safety Engineer, Operations-Mechanical Integrity Engineer,Design Engineer, Risk Assessment)
• Area Classification Flowchart Class I
• Area Classification Procedure (Plot Plans, Process Flow Diagrams, PId, Pfd)
• Process Pressure, TemperatureFlow Rates
• Stream Material Balance
• Electrical Hazardous Areas IEC 60079-17 Case Studies

Sesi 3-4

Skill Focus:

• Risk Assessment Methodology
• Determine Fire Hazard Properties of Combustible Materials
• Classified Area Extent in Equipments (Vessels, Tanks, Trenches, Sumps, Building Structures, Dikes, Partitions, Levees Other Items affect Dispersion Process MaterialWind Direction)
• Point Sources of Emissions Area Classification Documentation
• Equipment in Classified Areas
• Protection Techniques Divisions
• Equipment Approval Equipment
  • Equipment In Class I Locations
  • Equipment In Class Ii Locations
  • Certification Bodies
  • Product Utilization
  • Flameproof (Special Motor enclosures)
  • Increased Safety which Involves More Robust Electrical Designs
• Div 1 Design Considerations
• Maximum Explosive Pressure, Safe Clearance (Flame path)Minimum Ignition Temperature
• Special Insulation Or Thermostats
• NEC Temperature Codes
• Motor Protection Methods
  • Intrinsically Safe (2 Faults)
  • Flameproof
  • Tighter Constraint son Electrical Design
  • Purged
  • Non Sparking
  • Increased Safety Terminal Box
  • Motor Nameplate Ul Listed Nameplate
• Methods Of Protection Hazard Reduction
  • Confine The Explosion
  • Energy Limiting
  • Purging And Pressurization
  • Oil Immersion
  • Physical Isolation
  • Nonincendive System
• Electrical Hazardous Areas IEC 60079-17 Case Studies

Electrical Hazardous Areas Installation Inspection&Maintenance IEC 60079-17 Training

Selama training, instruktur kami akan menggunakan kombinasi teori serta praktek langsung dengan studi kasus telah dipersiapkan yang menyerupai Proyek nyata.

Materi Training dirancang khusus oleh para praktisi Project Engineers sesuai dengan experience dan solid knowledge mereka dalam menangani project. Anda akan mendapat sharing ilmu langsung dari para praktisi yang berpengalaman bertahun-tahun.

QUICK REGISTER :