DEVELOP Training Center menyelenggarakan Kelas Piping Slug Flow Control for Multiphase Production Systems yang sangat berguna untuk mendapatkan pengetahuan tentang pengendalian slug flow pada sistem produksi multifasa, mencakup pembentukan slug, kondisi aliran, profil pipa, tekanan, laju produksi, surge, dan pemantauan operasi.
Pelatihan diselenggarakan melalui pemaparan materi dan diskusi interaktif di dalam kelas. Peserta didorong untuk berpartisipasi aktif dalam memahami materi yang disampaikan oleh instruktur.

Sesi 1-2
- Multiphase flow behavior in production gathering and transport piping
- Slug flow formation mechanisms in oil, gas, and water systems
- Terrain-induced and hydrodynamic slugging characteristics
- Slug frequency, liquid volume, and flow regime identification
- Pipeline elevation profiles affecting multiphase flow behavior
- Pipe diameter and flow velocity effects on slug formation
- Operating pressure and production rate effects on slugging
- Slug flow impact on separators and downstream process equipment
- Pressure fluctuation and liquid surge effects on piping systems
- Slug detection indicators from process operating records
- Production piping data required for slug flow assessment
- Case Study
Sesi 3-4
- Slug mitigation through production rate and pressure control
- Pipeline routing considerations for multiphase flow stability
- Slug catcher and inlet piping interface requirements
- Choke and valve effects on multiphase flow behavior
- Flowline operating limits for slug-prone production systems
- Liquid accumulation and low-point effects on slug formation
- Operational monitoring for recurring slug flow conditions
- Transient pressure effects on production piping components
- Commissioning checks for multiphase production flowlines
- Slug event records and production system review
- Final flow control review for stable multiphase production operation
- Case Study
Sejalan dengan teori yang disampaikan, akan disertakan sebanyak mungkin studi kasus yang relevan dengan kondisi industri saat ini. Peserta juga diberikan kesempatan untuk bertanya dan berdiskusi terkait topik yang dibahas.
